22
3.5.5
VLAN Settings
You can set the VLAN setting in this page.
There are two kind of destination packets coming from the IP Phone’s WAN port. One packet goes to
the IP Phone, and the other goes through the LAN port to the PC.
VLAN Packets:
If you enable the first VLAN Packets and set the VID, User Priority, and CFI, all the
incoming packets will be check with the IP Address and the VID.
VID:
You can follow your service provider to set your VID.
User Priority:
Defines user priority, giving 8 priority levels. IEEE 802.1P defines the operation for
these 3 user priority bits. Usually this will be defined by your service provider.
CFI:
Canonical Format Indicator is always set to zero for Ethernet switches. CFI is used for
compatibility reason between Ethernet type network and Token Ring type network. If a frame received
at an Ethernet port has a CFI set to 1, then that frame should not be forwarded as it is to an untagged
port.
