MicroNet SP3366, Руководство пользователя

Страница: 11 / 75

Warning:
Using an alternate power supply, other than the one supplied, may cause
the router to malfunction.
3.2 Connecting to Web-Based Management
After the network connection is established, the next step is to setup the modem
router with proper network parameters for the user’s network environment.
Before connecting to the modem router and start configuration procedures, user’s
computer must be able to get an IP address automatically (use dynamic IP address).
If the PC is set to ‘static IP address’, then follow instructions below to reconfigure it to
‘dynamic IP address’.
3.2.1 IP Address Configuration
a) Windows 95/98/Me
1. Click the Start button and select
<Settings>
, then click
<Control Panel>
. The
Control Panel window will appear.
2. Double-click on
<Network>
icon. The Network window will appear.
3. Check the list of Network Components. If TCP/IP is not installed, click the
<Add>
button to install it. If TCP/IP is installed, go to step 6.
4. In the Network Component Type dialog box, select
<Protocol>
and click
<Add>
button.
5. In the Select Network Protocol dialog box, select
<Microsoft>
and
<TCP/IP>
then click the
<OK>
button to start installing the TCP/IP protocol. Windows CD
may be needed to complete the installation.
6. After installing TCP/IP, go back to the Network dialog box. Select
<TCP/IP>
from the list of Network Components and then click the <Properties> button.
7. Check each of the tabs and verify the following settings:
y Bindings: Check Client for Microsoft Networks and File and printer sharing
for Microsoft Networks.
y Gateway: All fields are blank.
y DNS Configuration: Select Disable DNS.
8