Micronature MindAI, Руководство пользователя

Страница: 5 / 8

the success of the installation;
Device installation
1. Install the MindAI master device
The master device can be installed on horizontal position or pasted on wall.
Matters needing attention are listed as following when the master device is pasted on
wall:
①
Append the 3M glue to the back of the master device's base;
②
Make sure the distance between the base and plug is less than 1 meter;
③
Make the USB port of the base toward specific direction according to your
needs. The gradienter can be used for correction of horizontal-position control;
④
Make sure the attachment point of the wall is clean and smooth;
2. Install the MindAI slave device
①
Append the 3M glue to the back of the slave device's base;
②
Stick the the base to the air-conditioning's front near the screen, then append
the slave device to the base(as shown below)