background image

T 2052 Combination 60W Soldering & 90W 
Vacuum Desoldering Station

Operating Instructions

Altronic Distributors warrants this product for two years from the date of purchase from Altronics or its 

resellers to the consumer. 

During the warranty period, we undertake to repair or replace your product at no charge if found to be 

defective due to a manufacturing fault. The warranty excludes damage by misuse or incorrect instal-

lation (i.e. failure to install and operate device according to specifications in the supplied instruction 

manual), neglect, shipping accident, or no fault found, nor by use in a way or manner not intended by 

the supplier.

For repair or service please contact your PLACE OF PURCHASE. 

If this item was purchased directly from Altronics please make a warranty claim by:

 

1.  FOR MAIL ORDER CUSTOMERS (includes school and trade orders), 

 

 

a)    Ringing us on 1300 797 007 and quoting your tax invoice number.

 

 

b)    Upon contacting Altronics, we will issue an R.A. (Return Authorisation).  

 

 

    As Altronics have a number of service agents throughout Australia,  

 

 

    a copy of the R.A. will be emailed, faxed or mailed to you with full instructions 

 

 

   of how and where to send the goods. The freight for shipping goods back to  

 

 

    Altronics for all repairs is at the customers expense. 

 

 

c)    A copy of the R.A. form, (or at the very minimum, the R.A. number) must  

 

 

    accompany the goods to effect the repair.

 

 

d)    Altronics will pay the return freight to the customer where the warranty claim  

 

 

    has been accepted. 

 

 

e)    Please quote the R.A. number in any correspondence to us. 

 

2.  FOR OVER THE COUNTER PURCHASES; to make a warranty claim,  

 

 

please return the goods to us in any of our stores, with a copy of your  

 

 

proof of purchase (tax invoice).

 

 

a)    Upon leaving the goods at one of our stores, an R.A. number  

 

 

    will be issued to you.

 

 

b)    Once repaired, you will be contacted, advising that the goods are ready to be  

 

 

    collected from the store.

It is at Altronics discretion as to whether the goods will be repaired or replaced (whilst under warranty); 

and as to whether identical goods will be used to replace the item due to changes of models / prod-

ucts.

Note: Under no circumstances should you attempt to repair the device yourself or via a service centre 

not authorised by altronics, as this will invalidate the warranty!

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You 

are entitled to a replacement or refund for a major failure and for compensation for any other reason-

ably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the 

goods fail to be of acceptable quality and the failure does not amount to a major failure.

Distributed by Altronic Distributors Pty. Ltd.

Phone: 1300 780 999 Fax: 1300 790 999

Internet: www.altronics.com.au

• Temperature adjustable

• Dual backlit LCD screens 

• Easy clean solder reservoir

• High suction vacuum pump

• Includes three tips and nozzle cleaners 

• Stand with integrated tip cleaners

• Suitable for ROHS compliant soldering

• Burn proof rubber leads

Содержание T 2052

Страница 1: ...return freight to the customer where the warranty claim has been accepted e Please quote the R A number in any correspondence to us 2 FOR OVER THE COUNTER PURCHASES to make a warranty claim please return the goods to us in any of our stores with a copy of your proof of purchase tax invoice a Upon leaving the goods at one of our stores an R A number will be issued to you b Once repaired you will be...

Страница 2: ...olled and utilises a ceramic heater to rapidly reach its oper ating temperature in just 20 seconds The iron includes a burn resistant rubber lead and ergonomic pencil design to ensure your comfort and safety The easy to read white backlit display on each unit provides a useful indication of set temperature and heater temperature The soldering iron and de soldering gun units can be switched on off ...

Страница 3: ...than 10 C between the actual temperature and the set point on the tip WAIT will display It means that the temperature electronic control system has not stabilised Please wait a moment to let the WAIT disappear 6 When ERROR is displayed there may be a trouble with the unit or the soldering iron or the de soldering gun is not connected to the control system correctly Operating Instructions 1 Place t...

Страница 4: ... about 1 2 solder waste please clean it immediately When you find the filter is becoming clogged up please replace the filter T 2052 Specifications Input 220 240V AC Heater 24V ceramic element Soldering nominal power 60W De soldering nominal power 90W Temperature range 160 C to 480 C Tip to ground resistance 0 1 Ohm Soldering heat up time 22 sec to 400 C De soldering heat up time 80 sec to 400 C D...

Отзывы: