Page 10
3). How to make internal call
At standby status, user can short press
to entre intercom call interface
,
then short
press to choose call target
,
press
to confirm calling
.
For indoor monitors installed in multi- apartment system
，
user can input target room
no. then start calling.
"
0
"
is the address no. for management center.
4). How to make broadcast(handset model does not have this function)
At standby status
,
user can long press
to enter broadcast status directly. It
shall broadcast to all indoor monitors in the system and
could not choose broadcast
target
.
5). How to use the monitor listening function
At standby status, long press to enter the monitor listening interface, then press
to choose the monitor listening target, press to confirm monitor listening.
The maximum monitor listening time is 8 hours.
Attention:
a. At monitor listening status, you can hear the voice from the opposite side, but they
can’t hear your voice.
b. At broadcasting status, your voice can be heard by the opposite side, but you can’t
hear the voice from them
c. There must be at least 2 monitors in the system for functions 3), 4) and 5)..
6). How to adjust the Volume, Brightness, Chrominance, contrast ratio and
display scale.
At video display or audio play interface, user can short press or to adjust
the volume or brightness.
At video display status, when adjust volume/brightness interface, short press
can switch to adjust other parameters interface: Volume, Brightness, Chrominance,
contrast ratio & display scale.