Micron Herbiflex4, Инструкция по эксплуатации

Страница: 7 / 32

7
If the spray head is horizontal the spray
should project forward about 0.6 m and
produce a pattern or band around 0.5 m
wide using the standard atomiser cone
housing (A 90). If the head is angled downwards the
band width will be reduced. The an-
gle of the spray head should not ex-
ceed 45° otherwise dripping will re-
sult.
Changing the angle of the spray head
will adjust the band width produced.
To change the angle of the spray head
slacken the vertical adjustment nut (1),
alter the angle of the head (2), re-
tighten the nut and check the new
band width produced.
The head of the HERBIFLEX-4 can
also be turned sideways in order to
spray narrow lines or adjust the place-
ment of the spray pattern produced.
To do this slacken the horizontal ad-
justment nut (3), rotate the head (4)
and re-tighten to lock the position.