Micron Wings Balsa Craft S.E.5a, Инструкции по сборке

Страница: 1 / 21

S.E.5a
(Build Instructions)
Specifications
Wingspan: 38 cm
Length: 31cm
Flying Weight: 41
Channels: 3 (Rudder Elevator Throttle)
Suggested Receiver: 3Ch Brick
Motor: 7mm Geared Motor
Airframe Only Kit
(Included Contents)
* Airframe Covering Parts (balsa)
* Airframe Skeleton (hardwood)
* Carbon pushrods
* Wheels and rubber tyre rings
* Fine sand paper
* Control linkages
Complete Kit
(Also contains these items)
* Receiver (brick style 3ch)
* Motor – 7mm Dual Geared
* 140mm Propeller
* Motor and receiver pre-wired (no soldering)
Needed to Complete
* Thick CA Glue
* Micro Phillips Head Screwdriver
* Hobby Knife
* Ruler
* Household Pins
* Hobby Masking or Other Tape
* Receiver Transmitter Charger Battery
* Tweezers
* Patience
* Keen Eyesight
* Steady Hands
Battery Options
The Nanotech 300mah 1S battery is
recommended for best balance.
If using the Nanotech 130mah or similar
battery, you will also need to add some
ballast to the nose.