— 6 —
CPD-2401
7
Customizing Your Monitor
US
1
Adjusting the size and centering
of the picture (SIZE/CENTER)
This setting is stored in memory for the current input signal.
1 Press the MENU button.
The main MENU appears on the screen.
2 Press the
v/V
buttons to highlight
SIZE/
CENTER and press the MENU button again.
The SIZE/CENTER menu appears on the screen.
3 Press the
v/V
buttons to select the desired
adjustment item. Then press the
6
B/b
buttons to
adjust the setting.
The OSD automatically disappears after about 30 seconds. To
close the OSD, press the MENU button again.
Note
Adjustment stops when either the horizontal or vertical size reaches its
maximum or minimum value.
2
Adjusting the shape of the
picture (GEOMETRY)
The GEOMETRY settings allow you to adjust the rotation and
shape of the picture.
The rotation setting is stored in memory for all input signals. All
other settings are stored in memory for the current input signal.
1 Press the MENU button.
The main MENU appears on the screen.
2 Press the
v/V
buttons to highlight
GEOMETRY
and press the MENU button again.
The GEOMETRY menu appears on the screen.
3 First press the
v/V
buttons to select the desired
adjustment item. Then press the
6
B/b
buttons to
adjust the setting.
The OSD automatically disappears after about 30 seconds. To
close the OSD, press the MENU button again.
3
Adjusting the color of the picture
(COLOR)
The COLOR settings allow you to adjust the picture’s color
temperature by changing the color level of the white color field.
Colors appear reddish if the temperature is low, and bluish if the
temperature is high. This adjustment is useful for matching the
monitor’s colors to a printed picture’s colors.
This setting is stored in memory for all input signals.
1 Press the MENU button.
The main MENU appears on the screen.
2 Press the
v/V
buttons to highlight
COLOR and
press the MENU button again.
The COLOR menu appears on the screen.
3 Press the
v/V
buttons to select a color
temperature.
The preset color temperatures are 9300K and 5000K. Since the
default setting is 9300K, the whites change from a bluish hue to
a reddish hue as the temperature is lowered to 5000K.
You can also fine tune the color temperature by selecting
in
step 2 above, and using the
6
B/b
buttons to adjust the color
temperature manually.
This OSD allows you to adjust the color temperature between
9300K and 5000K.
Press the
6
B/b
buttons to adjust the color temperature.
The OSD automatically disappears after about 30 seconds. To
close the OSD, press the MENU button again.
Adjusting the Settings
Select
To
HORIZONTAL CENTERING
shift the picture to the left or
right
VERTICAL CENTERING
shift the picture up or down
HORIZONTAL SIZING
enlarge or reduce the picture
width
VERTICAL SIZING
enlarge or reduce the picture
height
ZOOM
enlarge or reduce the picture
width and height
proportionally
Select
To
ROTATION
rotate the picture
PINCUSHION
expand or contract the picture sides
PIN BALANCE
shift the picture sides to the left or right
KEYSTONE
adjust the picture width at the top of the
screen
KEY BALANCE
shift the picture to the left or right at the
top of the screen
COLOR
9300K
5000K
26
6
Customizing Your Monitor
The OSD (On-screen Display) System
You can adjust most of the monitor’s settings using the OSDs (On-
screen Display). All of the OSDs in this illustration are described on
the following pages in order. You can access any of these OSDs
from the MENU OSD. To adjust monitor settings using the OSDs,
follow the steps below:
Basic controls:
• Use the
(MENU) button to display the MENU OSD and to
select menu items.
• Use the
(BRIGHTNESS)
v/V
buttons to highlight menu
items and to adjust settings.
To adjust the monitor settings:
1
Press the MENU button to display the MENU OSD.
2
Highlight the desired OSD using the BRIGHTNESS buttons and
press the MENU button again.
3
If necessary, use the BRIGHTNESS buttons to select a specific
item.
4
Adjust the monitor setting using the BRIGHTNESS and
CONTRAST buttons.
• To reset the current item to its original setting, press the
(RESET) button while the item’s adjustment OSD is displayed.
5
When you finish adjusting the setting, press the MENU button to
return to the MENU OSD.
Press the MENU button twice to return to normal viewing.
• Resetting: If you press the RESET button while an OSD is
displayed, only the current adjustment item is reset. For
additional information on using the reset function, see the
“Resetting the Adjustments” section on page 9.
• Each of the adjustment’s OSD automatically disappears after
30 seconds.
Introducing the OSD System
OK
MENU
MENU
EXIT
SIZE/CENTER
GEOMETRY
COLOR
CONVERGENCE
LANGUAGE
OPTION
HELP
80.0kHz/ 75Hz
1280 X 1024
1
2
3
4
5
6
7
Horizontal/Vertical
frequencies for
current input signal
Resolution for current
input signal
1
SIZE/CENTER
2
GEOMETRY
3
COLOR
4
CONVERGENCE
5
LANGUAGE
6
OPTION
7
HELP
SIZE/CENTER
26
26
GEOMETRY
COLOR
9300K
5000K
26
CONVERGENCE
LANGUAGE
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
NEDERLANDS
SVENSKA
ON
DEGAUSS
OPTION
HELP
RETURN TO MAIN MENU
RECOMMENDED RESOLUTION
FLICKER
THIN HORIZONTAL LINE
DISTORTED SHAPE
OUT OF FOCUS
DISCOLORATION