background image

7

5 Trouble shooting and Safety info 

5.1 Trouble shooting 

5.2 Safety info 

The following items are suggestion for safety use, please pay more attention. 

Please do not disassemble the device by yourself.

Please do not put the device on the overheating or too humid place, avoid exposure

to direct sunlight. Too high temperature will damage the device or even cause the

battery explosion.

Please do not use ATW on the airplane or near medical equipment.

FCC Caution. 

§ 15.19 Labelling requirements.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two 

conditions: 

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including interference that may cause 

undesired operation. 

  

§ 15.21 Information to user.

Trouble

 

Possible Reason

 

Solution

 

Messages can’t be 

reported to the 

backend server by 

Mobile network.

 

APN is wrong. Some 

APN can not visit the 

internet directly.   

Ask the network operator for the right 

APN.  

The IP address or port of 

the backend server is 

wrong.   

Make sure the IP address for the 

backend server is an identified address 

in the internet.   

Unable to power off 

ATW.  

The function of power key 

was disabled by 

AT+GTFKS.  

Enable the function of power key by 

AT+GTFKS.  

Battery can not be 

charged 

The battery has not been 

used for too long time and 

has been locked. 

Using a external power source with 3.6V 

to 4.2V DC power supply to active the 

battery or apply for after sale help.   

ATW can’t fix GPS 

successfully.  

The GPS signal is weak. 

Please move ATW to a place with open 

sky.  

It is better to let the top surface face to 

the sky. (The same surface with 

indication LED)   

Содержание ATW









Отзывы: