manualshive.com logo in svg

MICROLIT BEATUS, Руководство по эксплуатации

Поделиться
Скачать
MICROLIT BEATUS Скачать руководство пользователя страница 4

List of Recommended Reagents

Chemicals from A to Z

The following tables enlist the most frequently used reagents. 

They provide useful information for the safe and efficient use of 

MICROLIT BEATUS. All the safety precautions and recommendations 

within this Operation Manual must be followed carefully.

Code explanations:

A = Good resistance 

B = Acceptable with limitations 

C = Not recommended

1 = Acid vapours (better resistance with lower concentration).

       Do not leave the instrument on the bottle. 

       Rinse with distilled water after use.

2 = Risk of damage, softening or discoloration of external parts through vapours. 

       Do not leave the instrument on the bottle.

       Rinse with distilled water after use.

3 = Chemical degradation of glass parts (plunger/barrel)

6.

Operating Exclusions

Do not use the instrument with:

Liquids that attack FEP, PFA and PTFE (e.g. dissolved Sodium Azide*) 

Liquids that attack borosilicate glass (e.g. Hydrofluoric acid)

Hydrochloric acid > 40% and Nitric acid >70% | Tetrahydrofuran | 

Trifluoroacetic acid 

Explosive liquids (e.g. Carbon Disulfide)

Suspensions (e.g. of charcoal) as the solid particles may clog or 

damage the instrument

Liquids that attack PP (cap)

* The permissible concentration of dissolved Sodium Azide is not more than 0.1%.

4.

•

•

•

•

•

•

Storage Conditions

Store the instrument and accessories in a clean, cool and dry place. 

Storage temperature may vary from – 20°C to +50°C (from – 4°F to 122°F)

5.

Operating limitations

Liquids, which form deposits, may make it difficult for the piston to move or 

jam it (like crystallizing solutions or concentrated alkaline solutions). 

If the piston becomes too difficult to move, immediately clean the instrument. 

(Refer to section 13)

While dispensing inflammable fluids, avoid the built up of static charge. 

Make sure that you do not dispense into plastic vessels and do not wipe 

instruments with a dry cloth.

MICROLIT BEATUS is designed for general laboratory applications and 

complies with relevant standards, like DIN EN ISO 8655. Please check the 

compatibility of the instrument for a specific application (e.g. trace material 

analysis, food sector etc.). Approvals for specific applications, like production 

and administration of food, pharmaceuticals and cosmetics are not available.

•

•

•

4

3

Содержание BEATUS

















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды