36
If an error occurs during measurement, the
measurement is interrupted and an error
message «Err» is displayed.
•
Please contact your local
Microlife service center if the
error persists.
•
If you think the results
are unusual, please read
through the information
in this instruction manual
carefully.
Error
Description
Potential cause and
remedy
«
Err 1
»
Signal too
weak
The pulse signals
on the cuff are too
weak. Re-position the
cuff and repeat the
measurement.
«
Err 2
»
Error signal
During the
measurement,
error signals were
detected by the cuff,
caused for instance by
movement or muscle
tension. Repeat the
measurement, keeping
your arm still.
Error messages
ROURINE
Содержание WatchBP Office ABI
Страница 1: ...EN 3 Instruction Manual Bedienungsanleitung Mode d emploi Manuale di istruzioni DE 43 FR 83 IT 123 ...
Страница 2: ......
Страница 3: ......