Microlife Watch BP Home, Руководство пользователя

Страница: 13 / 107

11 WatchBP Home
EN
7. Battery Indicator and Battery change
Batteries almost flat
When the batteries are approximately ¾ used the battery symbol AO
will flash as soon as the instrument is switched on (partly filled
battery displayed). Although the instrument will continue to measure
reliably, you should obtain replacement batteries.
Batteries flat – replacement
When the batteries are flat, the battery symbol
AO
will flash as soon
as the instrument is switched on (flat battery displayed). You cannot
take any further measurements and must replace the batteries.
Which batteries and which procedure?
8. Using a Mains Adapter
You can operate this instrument using the Microlife mains adapter
(DC 6V, 600mA).
X
To store values from the « USUAL » mode, click « Download
Usual Mode Data ».
−
The file name is formed automatically from the patient’s iden-
tity number and the suffix «
Umode.xls » for stored values from
the « USUAL » mode.
−
To view the data later, click « Patient Files ».
X
To print the data sheet, click « Print ».
X
To delete the memories of the device, click « Clear Memory ».
X
To close the program, click « Exit ».

Ensure that the patient’s data is stored before using « Clear
Memory » or « Exit ».
)
If you want to give the device to another patient, ensure that
both memories have been deleted.
1. Open the battery compartment 7 at the back of the instrument.
2. Replace the batteries – ensure correct polarity as shown by the
symbols in the compartment.
)
Please use 4 new, long-life 1.5V, size AA batteries.
)
Do not use batteries beyond their date of expiry.
)
Remove batteries, if the instrument is not going to be used for
a prolonged period.
)
Use only the Microlife mains adapter available as an original
accessory appropriate for your supply voltage, e.g. the
«Microlife 230V adapter».
)
Ensure that neither mains adapter nor cable are not damaged.