EN
16
*
The default inflation pressure is 180 mmHg.
*
The device will deflate and re-pump more air into the
cuff if the blood pressure of the patient is higher than
that of the inflation setting of the device.
*
When the device is in standby mode, it will remind you
the current preset pressure setting by displaying the
current pressure setting on the screen.
5)
Start measurements – Press the Start/Stop
Button to start the measurement sequence.
6)
Three consecutive measurements – The device
will take three consecutive measurements with
one minute intervals in between measurements.
60-second
countdown...
60
seconds
60
seconds
*
A 60-second countdown will proceed the first
measurement .
Press and hold
for 7 seconds...
1
2
3
