Important!!!
Please read the operating instructions thoroughly before using the nebuliser.
Retain these instructions for further reference.
Important! Please observe the information in this booklet in order to prevent damages to the
blood pressure monitor and avoid error messages.
Type BF applied part
Keep Dry.
Read the instructions carefully before using this device.
Brief instructions
1. Make sure that the power switch is switched off (power switch in the 0 position).
2. Connect the air tube to the nebulizer kit (A) and the device (B). Please make sure that the tube is
securely attached to both valves.
3. Plug the power plug into a power outlet (C).
4. Remove the top from the nebulizer kit. Unscrew the cap of the nebuliser kit by turning it in the
direction of the arrow (D) and lift it off (E).
5. Add the correct amount of medical liquid to the medication tank (F). The liquid must not exceed
the maximum filling level. (min. 2 ml; max. 12 ml) Now screw the top of the nebulizer kit back to
the medication tank. Make sure that the nebuliser kit is kept upright after it has been filled with
the medical liquid.
6. Now attach a face mask, the mouthpiece or the nosepiece to the nebuliser kit (G) and hold the kit
in your hand. It is important to keep the nebuliser kit upright as otherwise the medical liquid may
spill. Start inhaling your medication.
EN
APONORM® COMPACT
2
