select year (21~40), then Press “MODE”
○
6
button to confirm the years’ setting, then move to month setting.
2.
Press “MEMO”
○
5 button to select month (1~12), then press “MODE”
○
6
button to confirm the month setting. then
move to day setting
3.
Press “MEMO”
○
5 button to select day (1~31), Press “MODE”
○
6
button to confirm the day setting. then move to
next setting
4.
Follow the previously mentioned instructions to set the day, hours, and minutes.
5.
Once you have set the minutes and pressed the START/IO button
○
4 , the date and time are set and the time is
displayed.
If no button is pressed for 20 seconds, the device will go back to stand-by for measurement with no date/time
information display and then switches to ready for measuring.
Press “Start/IO” button at any time-setting status, will allow to enter measuring stand-by mode directly. (If there is any
item of time-setting have not been completed, they will be show with no-information--)
Setting the beeper
○
26
At any status, press “MODE”
○
6 button for 3 seconds, will enter beep on/off setting
1.
In “beeper on/off” setting mode press and hold the “MODE
”
button
○
6 for 3seconds to set the beeper
○
26 .
2.
Press the MEMO
○
5 to either turn the beeper on or off. The beeper is activated when the beeper icon
○
26 is
shown without across. When the beeper setting has been chosen, press the START/IO button
○
4 to enter the
stand-by measurement mode; otherwise, the device automatically switches to ready for measuring after 10
seconds.
6.
Changing measurement mode
1.
Press the START/IO button
○
4 . The display
○
3 is activated to show all segments for 1second.
2.
The default mode is 3S body mode. Press the MODE button
○
6 to switch between 3S, 1S body mode
○
12
and
object mode
○
13 .
7.
Directions for Use
Always remove the protective cap
○
27
before use.
Measuring in 3S and 1S body mode with distance control
