Microlife BC 100 Soft, Руководство пользователя

Страница: 5 / 65

5 BC 100 Soft EN
Feeding with the breast milk

NOTE:
You can use the supplied bottle with the silicone teat when
feeding with the breast milk. Alternatively, you can also
express the breast milk with a NUK or Avent bottle before
feeding (corresponding NUK / Avent adapter is included in
the box).

Prior to feeding, ensure the bottle has been disinfected before
filling it with the breast milk that has been stored.

To defrost breast milk, store it overnight in the fridge, so as to
retain the nutrients. Once the breast milk is defrosted, it must be
used within 24 hours. Breast milk should only be defrosted in
warm water in especially urgent cases.
 If the breast milk smells unpleasant, it should be disposed of
immediately.

Never heat up breast milk in the microwave as it may be heated
unevenly and could burn your child when they drink it.

If heating up the breast milk, check its temperature before
feeding it to your baby.
5. Malfunctions and Actions to take
Use following table for solutions if any problem occur.
6. Guarantee
This device is covered by a 2 year guarantee from the date of
purchase. The guarantee is valid only on presentation of the guar-
antee card completed by the dealer (see back) confirming date of
purchase or the receipt.

The guarantee covers the device. Packaging is not included.

Opening or altering the device invalidates the guarantee.

The guarantee does not cover damage caused by improper
handling, discharged batteries, accidents or non-compliance
with the operating instructions.
Please contact Microlife-service.
7. Technical Specifications

Child use and care articles - Drinking equipment according to
EN 14350

Device for expressing breast milk

The technical specifications may change without prior
notice.
Defrosted
breast milk
(that had been
frozen)
Use immedi-
ately
10 hours Do not refreeze
Problem Potential solutions
There is no suction from
the device.

Check all parts of the device are
correctly assembled.

Check whether the pump attachment
is correctly placed on the breast.
No breast milk is being
pumped.
 Ensure that there is no milk remaining
in the silicone valve and obstructing
the milk flow.
Pumping the breast milk is
causing pain.

Try to relax and then attempt it again a
few minutes later. As you use the
device more and more, you will find it
easier to pump milk.

Set the suction level to MIN.

Consult your doctor.
The breast milk is leaking
out underneath the silicone
cushion.
 Remove the silicone cushion and re-
attach it. Ensure the silicone cushion is
correctly positioned and firmly secured
to the pump attachment.
 Lean your upper body forwards slightly.
Room
temperature
Refrigerator
(approx. 3 - 5 °C) Freezer
(approx. -16 °C)
One of the device compo-
nents has become altered
or damaged.
 Do not use any corrosive, gaseous
cleaning agents or solvents.

In some cases, marked fluctuations in
temperature can damage the plastic
on the device.

If any of the parts becomes damaged,
stop using the device.
Type: Manual Breast Pump BC 100 Soft
Dimensions: 200 x 160 x 66 mm
Weight: 135 g
Maximum
suction
pressure: -0.32 bar
Operating
conditions:
5 - 40 °C
30 - 85 % relative maximum humidity
(non condensing)
700 - 1060 hPa ambient pressure
Storage
conditions:
-20 - +60 °C
10 - 95 % relative maximum humidity
(non condensing)
700 - 1060 hPa ambient pressure
Problem Potential solutions