Microlife AFIB BT, Руководство пользователя

Страница: 13 / 18


This device can be used in conjunction with a personal computer (PC) running the Microlife Blood
Pressure Analyzer (BPA) software. The memory data can be transferred to the PC by connecting
the monitor via a cable.
If no CD and cable is included download the BPA software from www.microlife.com and use a
USB cable with a Mini-B 5 pin connector.
Installation and data transmission
1. Insert CD into the CD ROM drive of your PC. The installation will start automatically. If not,
please click on «SETUP.EXE».
2. Connect the monitor via the cable to the PC; there is no need to switch the device on. 3
horizontal bars will appear on the display and last for 3 seconds.
3. The bars will then flash to indicate that the connection between PC and device is successful. As
long as the cable is plugged in, the bars will keep flashing and the buttons are disabled.
During the connection, the device is completely controlled by the computer. Please refer to the
«help» file for software instructions.
8. BT-Link Functions
This device can be used in conjunction with an iPhone running the Microlife Blood Pressure
APP (microlife–vitalis) software.
The memory data can be transferred to the iPhone by connecting the monitor via a Bluetooth.
Installation and data transmission
1. Install the APP (microlife–vitalis) from APPLE store.
2. Connect the monitor via the Bluetooth; when the monitor stays in stand-by and press “+”
Key, “bt” will appear on the display in right angel.
3. The APP carried out the device pair with monitor. If the device pair is successful, the end-user
will proceed to download all data or download newest data or view data.
Storage capacity depends on the phone itself, the amount of storage space.
Effective transmission distance is 10 m for Bluebooth.
9. Data Memory
This device automatically stores up to 99 measurement value
Viewing the stored values
Press the M-button (10) briefly, when the device is switched off. The display first shows « M » (21) and
then an average value. The device then switches to the last stored value.
Press the M-button again to exit the memory mode. Pressing the «+» (12) or the «-» ( 1 1 ) button
repeatedly enables you to move from one stored value to another.
Memory full
Pay attention that the maximum memory capacity of 99 memories per user is not exceeded.
When the 99 memory is full, the oldest value is automatically overwritten with the