14
UVCS Controllers
(Supplied standard with UV24, UV57, UV80 & UV151).
UVCS
Series
MCS
Series
Simplistic in operation, these systems feature a tri-
colour LED that indicate system status and a 4-digit
display to indicate lamp life remaining. Pressing
the button will change the display to indicate total
running time. When the UV lamp is on and within its
operating age, the LED will be green. When the UV
lamp is not on or the lamp life has expired, the LED
will be illuminated red and an audible buzzer will be
sounding. To remedy this condition, the UV lamp must
be replaced with a new genuine Microlene UV lamp.
UVCXS/MCXS Controllers
(Optional upgrade: UVCXS-CONT Controller for UV24,
UV57, UV80 and MCXS-CONT Controller for UV151 - purchased separately)
UVCXS
Series
MCXS
Series
A full colour LCD screen provides the user with a
detailed description of the system’s performance in
addition to providing any applicable fault messages
and system diagnostics. All upgraded controllers
include an “infinite expandability port” located on the
right side of the controller. Simply plug in an optional
UV sensor module into the expandability port of a
LCD controller and the system will now monitor the
UV intensity of the system!
UVCXS/MCXS
Power-up Sequence
On start up, the controller will run through a diagnostic start-up and the sequence will
be displayed as follows on the colour LCD:
Next, the controller checks for and initialises any optional modules that may be
attached to the system.
Optional
Modules Check
• UV Sensor
• Solenoid
• 4-20 mA
• Remote Alarm
• Flow Meter
OR
