2004-8-31 T-9701 USER MANUAL Page: 8
1. Press
key two times, the CTCSS code number will flash.
2. Press
key to select your desired main channel.
3. Press
key to confirm the selection.
Listen Or Speak To Your Correspondent
You cannot speak and listen to your correspondent at the same time. While you are
speaking, you cannot hear your correspondent.
To listen to your correspondent:
1. Make sure the
key is not pressed.
2. When your correspondent starts to speak.
3. You can adjust the speaker volume by pressing
or
keys, volume digital
number are shown according to the setting.
To speak to your correspondent:
1. Press and hold the
key while you speak. The LED will light.
2. When you finish speaking, release the
key.
Call Your Correspondent
Press the
key, the call tone will appears. The T-9701 of your
correspondent will beep , depending on the call alert setting.
Lock/Unlock Keys
After you have pressed and hold the
key, the icon
appears. The
keys will not function.
To unlock the keys, press the
key again. The icon
will disappear.
Monitor Mode
Your
T-9701
has an Automatic Squelch Circuit to turn off the speaker when there is no
receiving message. However, the circuit will reduce the reception ability if the
receiving message signal is weak. It is advised to deactivate the circuit if you want to
monitor the weak signal.
To deactivate the Automatic Squelch Circuit (monitor mode):
1. Press and hold the
key until the monitor function enabled .
2. You will hear noise. This is normal because the circuit will not turn off the
speaker even the noise is large.
To activate the Automatic Squelch Circuit again:
1. Press and hold the
key until the monitor function will disable.
Search The Main Channel and CTCSS code
This function enables you to find a main channel used by other people.