5
Introduction
Technical Information
19. Servicing - Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
20. Please remove the power plug form the main power source or wall power source when not in use. When plugged in to a
power source, the system is in standby mode, so the power is not entirely cut off.
21. Replacement parts - When replacement parts are required, ensure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may
result in fire, electric shock or other hazards.
22. Mains fuses - For continued protection against fire hazard, use fuses only of the correct type and rating. The correct fuse
specification for each voltage range is marked on the product.
23. Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speaker
may be damaged when a peak level section is suddenly played.
24. The only means of completely disconnecting the product from the power supply is by removing the power cord from the
wall outlet or the product. The wall outlet or the power cord entry to the product must remain freely accessible at all times
while the product is in use.
25. Try to install the product near a wall socket or exetension cord and shall be easily accessible.
o
26. The highest environmental temperature suitable for this product is 40 C.
Specifications
2
Features
Package contents
SOLO3 speakers
2pcs
3.5mm stereo - 2RCA cable (1.8m)
pc
Interconnect speaker cable
1pc
User manual
1
1pc
Amplifier
Output power: 60 Watt RMS
Power distribution: 30 Watt x 2
Harmonic distortion: < 0.3% 1W 1kHz
Signal/Noise ratio: > 70dB
Separation: > 50dB
Input sensitivity: 400mV
Speakers
Tweeter driver type: 1"
Tweeter rated power: 20 Watt 6 ohm
Bass and mid-range driver type: 6.5" x 2
Bass and mid-range rated power: 50 Watt 3 ohm
Interfaces:
Output: Terminals
Input: 2RCA
Power
Power supply: AC 220V - 240V ~ 50Hz, 260mA
Dimensions
Product dimension: 183 x 550 x 212mm (W x H x D)
Product net weight: 19.2kg
Special heritage range for Microlab's 2.0 system that employs high quality design techniques
and speaker technology - perfect sound quality and near linear response
Incorporates IGBT OCL circuit for pure tones and dynamic acoustic production
High quality sound and full range spectrum, ideal for all music lovers and audiophiles
·
·
Crystal clear dynamic highs, balanced mid range and deep bass, 3-way speaker system
·
Reference monitor quality, driven by high quality drivers
·
Each cabinet with 1" tweeter for high notes and woofer for mid to low depths and bass
·
Ideal for high fidelity music, movies and digital media playbacks
Beautiful wooden cabinets with excellence sound quality. Powerful 3-way speaker system
80-SOLO3(08)-97-0001-01