Caution:
TO reduce the risk of electric shock, do not dismantle the product and do not expose the product to rain or moisture.
No user-serviceable parts inside. Refer servicing to qualified personnel only.
Explanation of Graphical Symbols:
The lightning flash within an equilateral triangle is intended to alert you to the presence of uninsulated “dangerous
voltage” within the product's enclosure that may be of sufficient magnitude to constitute an electric shock to
person or persons.
The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating
and maintenance (servicing) instructions in the literature accompanying the product.
WARNINGS:
1. Read Instructions: All the safety and operating instructions must be read before the product is operated.
2. Retain Instructions: The safety and operating instructions should be kept for future reference.
3. Heed warnings: All warnings on the product and in the operating instructions should be adhered to.
4. Follow instructions: All operating and usage instructions should be followed.
5. Installation: Install the product in accordance with the manufacturers’ instructions.
6. Power sources: This product should be operated only from the type of power source printed on the label marking found on
the product. If you are not sure of the type of power supply in your home, consult your product dealer or local power
company.
7. Grounding or polarization: the product is not required to be grounded. Ensure the plug is fully inserted into the wall outlet
or extension cord receptacle to prevent blade or pin exposure. Some versions of the product are equipped with a power
cord fitted with a polarized alternating line plug ( a plug having one blade wider than the other). This plug will fit onto the
power outlet in only one direction. This is a safety feature. If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat
the safety purpose of the polarized plug. When using an extension power-supply cord or a power-supply cord other than
that supplied with the appliance, it should be fitted with the appropriate molded plugs and carry the safety approval
allowed in your country.
8. Power cord protection: Power-supply cords should be routed so that they are not likely to be walked on, kinked or pinched
by items placed on or against them, paying particular attention to cords from the plugs, multiple sockets and the point
where they exit from the appliance.
9. Overloading: Do not overload wall outlets, extension cords or multiple sockets, as this can result in a risk of fire or electric
shock.
10. Ventilation: The product must be properly ventilated. Do not place the product on a bed, sofa, or other similar surface
which will buildup the temperature. Do not cover the product with any items such as tablecloths, newspapers, etc.
11. Heat: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products)
including amplifier which produce a lot of heat. No naked flame sources, such as lighted candles, should be placed on the
apparatus.
12. Wall or ceiling mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
13. Water and moisture: To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or
excessive moisture such as in a sauna or bathroom. Do not use this product near water: for example, near a bathtub,
washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.
14. Object and Liquid entry: Never push objects of any kind into this product through openings, as they may contact
dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on
the product. Do not place any object containing liquid on top of the product.
15. Cleaning: Unplug the product from the wall outlet before cleaning. The cabinet of subwoofer may be cleaned by dusting
with a dry cloth. If you wish to use an aerosol cleaning spray, do not spray directly on the cabinet; spray onto the cloth. Be
careful not to contact the drive units.
16. Attachments: Do not use attachments not recommended by the product manufactures, as they may cause hazards.
17. Accessories: Do not place this product on an unstable cart, stand, tripod, bracket or table. The product might fall and
cause serious injury to a child or adult, and damage the product. Use only with a cart, stand, tripod, bracket or table
recommended by the manufacturer or sold with the product. Any mounting of the product should follow the manufacturer's
instructions and should use a mounting accessory recommended by the manufacturer.
18. Moving the product: A product and cart combination should be moved with care. Quick stops, excessive force and uneven
surfaces may cause the product and cart to overturn.
19. Unused periods: The power cord of the appliance should be unplugged from the outlet during lightning storms or when
1
Important Safety Instructions
Troubleshooting
Frequently Asked Questions Solutions
(FAQ)
If the problem still exists, please contact the distributor or seek professional advice.
Your iPod does not dock properly
No Sound
6
No sound and your iPod is not
charging
No sound after quickly undocking
or docking your iPod
Your iPod does not respond to the
iDock remote control buttons
shown:
·
Ensure the dock insert is correct for the iPod type
·
Remove the iPod and check for obstructions and foreign
objects on the interfaces.
·
Ensure the system is plugged in and your iPod is turned ON,
and a music track is selected and played.
·
Depress the Play/Pause button on the remote control.
·
Increase the volume level
·
Remove your iPod from the iDock, and wait briefly before
reinserting again. You might need to do this for several times.
·
Ensure your iPod is running with compatible software.
·
Ensure the power cable is correctly plugged into the wall’s AC
socket.
·
Ensure the iPod is firmly seated on the iDock
·
Remove your iPod from the iDock and wait for 5 seconds.
Next reinsert the iPod to the iDock.
·
Unplug the power cable for 1 minute and the reinsert it again.
This will reset the system.
·
Remove your iPod from the iDock and pause briefly before
reinserting. You might need to repeat this several times.
·
Try using the remote control from different locations. If it
works somewhere else, then strong lighting or other room
ambience might be affecting the Infrared signal.
·
Ensure no obstructions are in between the Infrared sensor
and the remote control. Wipe off any dirt or oil stains on the
lens of the remote control.
·
Ceck the remote control batteries and ensure the cell positive
side is facing up in the compartment tray.
·
Try replacing with fresh batteries.
·
Upgrade the software inside the iPod. For more details,
please refer to page 7 - To check for iPod Compatibility.
All specification and information are subject to changes without further notice
80-iDock100-97-0001-05
非美国版
2009-07-31
出