7
Operation instruction:
1.Turn on
the power. The symbol will be shown on the left of the
display and the system is in Stand-by mode.
2.
Press ST-BY button on the control unit or remote ST-BY key to turn on the system the defaulting setting
up of the system is 2.0 input, and master volume at 20dB.
5.
Balance adjustment for R/L of the satellite speakers: Pres BAL/L, and BAL/R to adjust the balance for the
right and left channel of the speakers, at +/- 4dB, start at 0dB
2.0
3.Master
Volume adjustment: Press /- button on the control unit or VOL +/- key on the remote
control, to turning the volume between 0dB-60dB.
4.
Audio input selection: Press INPUT-SEL on the control unit or press the INPUT-SEL key on the remote
control to select the audio input CD or AUX.
AUX
6.
1
2
（ ）
（ ）
Tone adjustment for Right and Left channel of the satellite speakers:
Press /- on the remote control to adjust the treble,
at +/-7dB, start at 0dB.
Press BASS +/- on the remote to turn the volume of bass, at +/-7dB,
start at 0dB,
7
7
Note:
There are overload, short circuit, and thermal overload protections in the system, when protection
occurs, it maybe no output in the system, you must turn off the power and turn on again to operate the
system
DVD
DVD
80-H300-97-0001-02 2008-08-14
