Page 2
CONTENTS
DESCRIPTION..........................................................................3
UNPACKING.............................................................................3
INITIAL SETUP .........................................................................3
SIGNAL STANDARD SELECTION ...........................................4
CONNECTIONS........................................................................4
Power ....................................................................................4
Inputs.....................................................................................4
Outputs..................................................................................4
OPERATIONS...........................................................................5
Power ....................................................................................5
A ............................................................................................5
B ............................................................................................5
C............................................................................................5
D............................................................................................5
FLIP X ...................................................................................5
FLIP Y ...................................................................................5
BARS.....................................................................................5
RS232 REMOTE CONTROL ....................................................6
IN CASE OF DIFFICULTY ........................................................6
SPECIFICATIONS ....................................................................7
WARRANTY..............................................................................8
RETURNS.................................................................................8
Rev 0 03-06-2008, Reviewed 07-06-2015
Page 7
SPECIFICATIONS
Input levels
Composite/B&W
1Vpp composite 75 Ω
Output levels
Composite Video
1Vpp into 75 Ω
S-Video (Y, C)
1Vpp Y, 286mV C (burst) into 75 Ω
Connectors
Composite
BNC female (5)
S-Video
4 pin mini-DIN female (1)
Keyboard
6 pin mini-DIN (1) [presently not used]
Power
1.3mm female coaxial power jack
RS232 Remote
3.5mm female 3 pin mini phone jack
RS232 Interface
9600 baud, 8 data bits, no parity, 1 stop bit.
Memory
64 megabits total
Timebase Correction
Digital memory, frame aligned, one for each channel
Decoding
10 bit multi-standard digital decoding
Processing
Digital
Encoding
Digital Modulation
Oversampling
2x (27MHz) output over-sampling
Output DACs
10 bit digital to analog converters
Input Filters
Analog anti-aliasing filters
Output Filters
Digital plus 4
th
order analog anti-aliasing filters
Horizontal Freq.
RS-170/NTSC
15.734KHz typical
CCIR/PAL
15.625KHz typical
Vertical Frequency
RS-170/NTSC
59.94Hz typical
CCIR/PAL
50Hz typical
Bandwidth
6Mhz typical
Crosstalk
Greater than 48dB
Temperature
Operating
0
E
-
40
E
C (32
E
-
104
E
F)
Storage
-40
E
-
60
E
C (-40
E
-
140
E
F)
Humidity
Operating
10%
-
90% (non-condensing)
Storage
5%
-
95% (non-condensing)
Power
Voltage
+5VDC +/- 5%, regulated, neg ground
Consumption
450mA typical (3W)
Protection
Automatic electronic fuse, internal, self resetting
Size
7.25" W x 5.00" D x 1.60" H (184 x 127 x 40 mm)
Weight
19.5 oz. (550g)
Power Module
Type
Switching power supply, UL, CUL/CSA, CE, TUV approved
Output
5 VDC, 1000 to 2000mA, Regulated (no minimum load)
Voltage In
120VAC (USA) or 120
-
230 VAC, 50 - 60 Hz, 0.5A Max (RoHS)
Input Cable
None, small wall mount
Output Cable
4ft. 2 wire, 1.3mm female coaxial barrel connector
Size
3.2" x 1.8" x 1.2" (82mm x 46mm x 31mm)
Weight
2.6 oz (74g)
The MIR540 is manufactured in the USA by MicroImage Video Systems.
