© Microhard Systems Inc.
90
4.0 Configuration
Defines accessibility of SNMPv3; If Read Only is selected, the
SNMPv3 user may only read information; if Read Write is selected, the
SNMPv3 user may read and write (set) variables.
V3 User Read Write Limit
Values (selection)
Read Only /
Read Write
Defines SNMPv3 user’s authentication level:
NoAuthNoPriv: No authentication, no encryption.
AuthNoPriv:
Authentication, no encryption.
AuthPriv:
Authentication, encryption.
V3 User Authentication Level
Values (selection)
NoAuthNoPriv
AuthNoPriv
AuthPriv
SNMPv3 user’s authentication password. Only valid when V3 User
Authentication Level set to AuthNoPriv or AuthPriv.
V3 User Authentication Password
Values (string)
00000000
SNMPv3 user’s encryption password. Only valid when V3 User
Authentication Level set to AuthPriv (see above).
V3 User Privacy Password
Values (string)
00000000
If enabled, an authentication failure trap will be generated upon
authentication failure. (SNMP v1 & v2 only).
Auth Failure Traps
Values (selection)
Disable
/ Enable
The community name which may receive traps. (SNMP v1 & v2 only).
Trap Community Name
Values (string)
TrapUser
Defines a host IP address where traps will be sent to (e.g. SNMP
management system PC IP address). (SNMP v1 & v2 only).
Trap Manage Host IP
Values (IP Address)
0.0.0.0
Defines the user name for SNMPv3.
SNMP V3 User Name
Values (string)
V3user
Select the SNMP version used. Only SNMP version 1 & 2 support
SNMP traps (See MIB).
SNMP Version
Values (selection)
Version 1 /
Version 2
/ Version 3
