Microhard Systems n2420B, Руководство по эксплуатации

Страница: 15 / 16

N2420B Operating Manual:Glossary
9
A. Approved Antennas
Group Part Number Description
Rubber Ducky
MHS031100 2dBi, 2.4GHz Rubber Ducky Antenna RPTNC Swivel
MHS031110 2dBi, 2.4GHz Rubber Ducky Antenna Reverse SMA Swivel
MHS031120 2dBi, 2.4GHz Rubber Ducky Antenna Reverse SMA Straight
Patch Antennas
MHS034200 8 dBi, 2.4GHz Mini Flat Patch Directional Antenna RPTNC Pigtail
MHS034210 14 dBi, 2.4GHz Flat Patch Directional Antenna RPTNC Pigtail
Yagi Antennas
MHS034100 9 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
MHS034110 12 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
MHS034120 14 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
MHS034150 14.5 dBi, 2.4GHz Yagi Directional Antenna RPTNC Pigtail
Omni Directional
MHS031260 5 dBi, Omni Directional Antenna RPTNC Pigtail
MHS034000 6 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail
MHS031340 8 dBi, Omni Directional Antenna RPTNC Pigtail
MHS034020 10.5 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail
MHS034030 12 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail
MHS034040 15 dBi, 2.4GHz Omni Directional Antenna RPTNC Pigtail
ATTENTION :
Changes or modifications not expressly approved by Microhard Systems Inc. could void the user’s authority to operate
the equipment. This device has been tested with MMCX and Reverse Polarity SMA connectors with the antennas listed
in Appendix A When integrated in OEM products, fixed antennas require installation preventing end-users from
replacing them with non-approved antennas. Antennas not listed in the tables must be tested to comply with FCC
Section 15.203 (unique antenna connectors) and Section 15.247 (emissions). Please Contact Microhard Systems Inc. if
you need more information.
RSS-Gen Notices for Transmitter Antenna
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter (IC:3143A-11P31) has been approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that
type, are strictly prohibited for use with this device.