Microh Ultra Spot 700, Руководство пользователя

Страница: 6 / 20

The lamp used in this projector is a discharge lamp.After
switching off don't attempt to restart the projector until la
mp has cooled,this will require approx 15 minutes.Switc
hing the lamp on and off at short intervals will reduce the
life of both the lamp and the projector.But occasional bre
aks will prolong the lamp and projector
4.Rigging the fixture
4 1 Mounting
.
- .
The FIXTURE can by installed in any position
Pay attention to the regulations of CE
The installation shall be done by qualified staff only
?
?
?
?
For the various mounting positions of the (standing on the floor, sideways or hanging)
different accessories kits are available.
Through this a safe and firm installation is assured.
You'll find special connectors on the bottom side of the system which are put to use here.
In addition the front side of the system is marked with (FRONT) as this is important for a even
orientation during installation.
FIXTURE
4 2 Installing the Clamps
.
-
-
-
DANG ER TO LIFE Please consider the respective national norm s during the Installation! The
installation must only be carried out by an authorized dealer!
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
The installation must always be secured with a secondary safety attachment, e.g. An appropriate
catch net. This secondary safety attachment must be constructed in a way that no part of the
installation can fall n if the main attachment fails.
4