Microh Ultra Beam 700, Руководство пользователя

Страница: 4 / 19

Ø
Ø
Ø
Ø
Ø
Mounting surfaces
Maximum ambient temperature
Protection against electrical shock
Hooking up to the supply mains
Temperature of the external surface
It is permissible to mount the fitting on normally flammable surfaces.
or the fitting to operate well and reliably, the ambient temperature should not
exceed 45°C (104°F).
Connection must be made to a power supply system fitted with efficient
earthing (Class I appliance according to standard EN 60598-1).
It is, moreover, recommended to protect the supply lines of the projectors from
indirect contact and/or shorting to earth by using appropriately sized residual
current devices.
Connection to the electricity mains must be carried out by a qualified electrical
installer.
Check that the mains frequency and voltage correspond to those for which the
projector is designed as given on the electrical data label.
This label also gives the input power to which you need to refer to evaluate the
maximum number of fittings to connect to the electricity line, in order to avoid
overloading.
The maximum temperature that can be reached on the external surface of the
fitting, in a thermally steady state, is 80°C (176°F).
F
Ø
Make sure all parts for fixing the projector are in a good state of repair.
Make sure the point of anchorage is stable before positioning the projector.
The safety chain must be properly hooked onto the fitting and
secured to the framework, so that, if the primary support system fails, the fitting
falls as little as possible. If the safety chain gets used, it needs to be replaced
with a genuine spare.
The projector needs to be positioned so that the objects hit by the beam of light
are at least 2 5 metres from the lens of the projector.
The projector must be positioned so that any flammable materials are at least
0.20 metres (8") from every point on the surface of the fitting.
Installation
Minimum distance of illuminated objects
Minimum distance from flammable materials
Ø
?
.
2 5
.
40
CAUTION ! EYEDAMAGES !
Avoid looking directly into the light source
(meant especially for epileptics) !
2
80
40