5
For installations where the DMX cable has to run a long distance, or is in an electrically noisy environment, it is recommended to
use a DMX terminator. This helps in preventing corruption of the digital control signal by electrical noise. The DMX terminator is
simply an XLR plug with a 120 Ω resistor connected between pins 2 and 3,which is then plugged into the output XLR socket of the
last fixture in the chain. Please see illustrations below.
6. MENU NAVIGATION
MODE FUNCTIONS
‘Audi’:
Sound Control
‘Auto’:
Auto-run Control
‘dxxx’:
DMX512 Control (The ‘xxx’ is the address code. Press UP or DOWN to set the address)
‘SLAV’: Slave Control (The slave unit will do the same effect as master unit.)
‘XXXX’: Total running time. (This mode displays the total fixture hours that the unit has been in operation.)
Before using the DMX512 controller, you should set the channel address. It can be set 001~511 address, by pressing
& releasing the UP & DOWN buttons.
1
2
3
PIN 3
PIN 2
120
Ω
