Microh RIO ELEMENT HEX12, Руководство пользователя

Страница: 9 / 12

Mounting And Installing
Caution: for added protection, mount the fixture in areas outside walking paths,
seating areas, or in areas were the fixture might be reached by unauthorized
personnel. Before mounting the fixture to any surface, make sure that the
installation area can hold a minimum point load of 10 times the devices weight.
Fixture installation must always be secured with a secondary safety attachment,
such as an appropriate safety cable. Never stand directly below the device when
mounting, removing, or servicing the fixture.
Whether installing inverted on a truss or ceiling, or set on a flat level surface be
sure this fixture is kept at least 0.5m (1.5ft) away from any flammable materials
(decorations, etc.). Always use and install the supplied safety cable as a safety
measure to prevent accidental damage and/or injury in the event the clamp fails.
Mounting Points:
Overhead mounting requires extensive experience, including calculating working
load limits. A knowledge of the installation material being used, and periodic safety
inspection of all installation material and the fixture are all imperative and should
only be performed by a qualified technician. Improper installation can result in
bodily injury or damage.
Regardless of the rigging option you choose for your MICROH RIO IP PAR 186
fixture, always be sure to secure your fixture with a safety cable. The fixture
provides a built-in rigging point for a safety cable hanging bracket. Be sure to only
use the designated rigging point for the safety cable and never secure a safety
cable to a carrying handle.