Overhead Rigging
3
Ａ ｔ ｔ ｅ ｎ ｔ ｉ ｏ ｎ ！
The installation must be carried out by qualified service personal only. Improper installation can
result in serious injuries and /or damage to property. Overhead rigging required extensive experience!
Working load limits should be respected, Certified installation materials should be used, the installed
device should be inspected regularly for safety.
Make sure the area below the installation place is free from unwanted persons during rigging, de-rigging
and servicing.
Locate the fixture in a well ventilated spot, far away from any flammable materials and/or liquids. The
fixture must be fixed at least 50cm from surrounding walls
The device should be installed out of reach of people and outside areas where persons may walk by or be
seated.
The device should be well fixed; a free swinging mounting is dangerous and may not be considered!
Do not cover any ventilation opening as this may result in overheating
Before the first time use, it must be inspected by professional staff to make sure safety, inspection regularly
every year..
◆
◆
◆
◆
◆
◆
Ｔ ｈ ｅ ｐ ｏ ｗ ｅ ｒ ｃ ｏ ｒ ｄ ｓ ｐ ｅ ｃ ｉ ｆ ｉ ｃ ａ ｔ ｉ ｏ ｎ ｔ ａ ｂ ｌ ｅ ：
Cable(EU)
Brown
Liht blue
Yellow/Green
Cable(US)
Black
White
Green
Pin
Live
Neutral
Earth
International
L
N
Please use the attached power, note that power voltage
and frequency are the same as the marked voltage and
frequency of device when connecting power. Every device’s
power should be connected separately, so that device can
be controlled individually.
Ａ Ｃ Ｐ ｏ ｗ ｅ ｒ
L E N
FUSE: 5×20mm
250V
1
.
5A
slow
Never expose the lens to direct sunlight, even for a short period, This may damage the light effect or even
cause fire!
Содержание MONSOON FX
Страница 1: ...M ONSOON F X...
