4
Clamp Mounting:
The MICROH LED TRICKSTER provides a unique mounting bracket assembly that integrates 2
brackets to be used to mount on a truss or the floor. When mounting this fixture to truss, be sure to secure an
appropriately rated clamp to the included bracket fitted through the center hole. As an added safety measure, be sure
to attach at least one properly rated safety cable to the fixture.
Regardless of the rigging option you choose for your MICROH LED TRICKSTER effects fixture, always be sure to
secure your fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the hanging
bracket as illustrated above. Be sure to only use the designated rigging point for the safety cable and never secure a
safety cable to a carrying handle.
5. DMX-512 CONTROL CONNECTIONS
This fixture complies with international USITT DMX standards and can be used with either a 3 pin or 5 pin DMX
connector. Plug in the provided 3 pin XLR cable to the female 3-pin XLR output of your controller and the other side to
the male 3-pin XLR input of the LED TRICKSTER effects. To connect the units to DMX, you must daisy chain the
fixtures together as referred in the diagram below. Always end your DMX-512 connection with a DMX terminator.
