3
ATTENTION
˖
˖
DANGER OF LIFE
ʽ
RISKOF FIRE
ʽ
RISK OF SHORT CIRCUIT
ʽ
ʽ
ATTENTION
˖
˖
DANGER OF LIFE
ʽ
RISKOF FIRE
ʽ
RISK OF SHORT CIRCUIT
ʽ
ʽ
suitably qualified;
-Verify whether any visible damage was caused during transport.lf the power cord.housing or the light are
damaged,do not operate the device;contact your specialized dealer immediately.
2. Supply Voltage,Mains Cord and Connection to Mains
The handling of supply voltage,mains cords and connections to mains calls for particular care considering the risk
from a life-threatening electric shock,the risk of fire and the risk of short circuits please observe the following notes in
particular:
Products operating on supply voltage should be kept out of the reach of children.Therefore ensure the permanent
supervision if children are in the immediate vicinity of the product!
For commercial facilities the regulations on the prevention of accidents of the respective trade association must be
observed.The operation of this equipment at schools,training facilities,and hobbyorself-help workshops must be
supervised responsibly by trained personnel.
Check the product regularly for any damage to the mains cord! Should you discover any damage to the malns cord,
do not operate or disconnect this product! Secure the product against accidental operation and contact your
specialized de-alert.
Always separate the product from mains by holding the mains plug by the handling surface .Never disconnect by
holding the line cord ! Be sure to connect the product exclusively to AC110~127V/59~60Hz!
Always insure during installation,operation, transport and when storing the product that the mains cord is not
exposed to possible mechanical damage, or damage caused by humidity,fluids,heat or cold!
The products cable entry must not be exposed to stress from pull! Create the mains connection once the product has
been installed only .Always connect the mains plug last !
The producct must only be connected to a proper outlet of the public supply grid .Connect the mains cord to suitable
outlets only ! Use entensions cords in compliance with specifications only! Do not allow the mains cord to come into
contact with other cords!
Ensure during installation ,operation,transport and storage that none of the cables are freely exposed!
Never touch the mains cord ,mains plug and outlet with wet or damp hands !
When not using the product, and proform to cleaning always disconnect the product from mains! To do so, hold the
mains plug by the handling surface and never pull the mains cord!
Never connect the device to dimmer packer!
3. Housing
Always insure during installation,operation,transport and when storing the product that no shocks or other forces
impact the housing !
The housing must not touch onto any other devices or objects during operation!
Easily flammable materials,e.g. decoration material and other surfaces and objects,must maintain a minimum
distance of 3m to the housing !Walls must maintain a minimum distance of 50cm to the housing!The device must be
installed on a fireproof surface only (no carpet)1 Always ensure a proper circulation of air.
Do not touch the housing during operation it will heat up .The housing is safe to touch approx .5 minutes following the
end of operation!
The device must never be carried via the projector anns.Use the caring handles only !
Fluids must not enter the housing as this could reduce the protective insulation and may trigger short circuits which
may lead to fatal electro shocks !If fluids have entered, disconnect the mains plug immediately and secure the
product against unintentional operation and contact yours specialized dealer! Damage caused as a re-suit of fluids
entering the housing is exempt from warranty .
No metal parts or other items must enter the housing as this may reduce the protective insulation or trigger short
circuits which may lead to fatal electric shocks !If metal parts or other items have entered ,disconnect the mains plug
immediately,secure the product against unintentional operation and contact your specialized dealer!Damage caused
by metal parts or other items in the housing is exempt warrantably.
4. Operating Environment
The product must be operated and
stored in a dry environment only !
Splash water ,rain,humidity,fog may reduce the protective insulation which may lead to fatal electric shocks!The limit
Содержание HALO BEAM 150
Страница 1: ......
