Microgem MG8EDVDRWA, Руководство пользователя

Страница: 12 / 17

11
O
PERATION
Operate your drive only in a horizontal position. If you operate it in a vertical orientation,
you may damage the disc or the drive if the drive falls over.
To Insert a Disc into the Drive
1. While the external drive is powered, push the eject button on the front panel to check
whether a disc is inside the drive or not. The disc slides out in a few seconds if it is
inside the drive.
2. Hold the disc by the center hole and the disc edge with your fingers (the disc label side is
facing up.) Properly insert the disc edge into the disc slot on the front panel, push the
disc into the drive with your thumb, then the disc will automatically slide into the drive
and get ready.
Note: Do not attach paper labels to the disc. Attaching a label to the disc may create an
imbalance. This will result in reading or writing errors. And the disc with paper
labels may easily be stuck in the drive.
To Remove a Disc from the Drive
1. Push the eject button on the front panel, and the disc will slide out from the disc slot in a
few seconds.
2. Hold the disc by the center hole and the disc edge with your fingers, and then draw out
the disc from the disc slot.