HiLink User manual EN
–
v 1.0.1
34
7.1
S
WITCHING
O
N AND
O
FF
HiSmart is switched on by pressing and holding the middle button (Microgate symbol) for longer than 3
seconds. Once on, the status LED blinks slowly with a GREEN light. If the button is held down for less than 3
seconds, the RED LED (error signal) is shown for 3 seconds and the device remains off. This feature is designed
to prevent the device from being turned on accidentally by briefly pressing the button.
To switch off, you need to press and hold the middle button for longer than 3 seconds and then the status LED
will turn RED. At that time, on releasing the button, the device will switch off.
