5
Unpacking Microwave Oven
1) Unpack the oven, remove all packing material, and examine the oven
for any damage such as dents, broken door latches or cracks in the
door. Notify the dealer immediately if the unit is damaged. Do Not
install if the unit is damaged.
2) Inspect and remove any remains of packing, tape or printed materials
before powering on the microwave oven.
Assembly Instructions
Remove all packaging material and accessories. Examine the oven for any damage,
such as dents or broken door. Do not install if oven is damaged.
1. Place the oven on top of the approved MicroFridge® refrigerator carefully lining
up screw holes of the refrigerator sash with microwave side holes.
• Do not block the inlet and outlet openings located at the rear and bottom of
the oven.
• Do not remove the feet from the bottom of the oven.
• Blocking the inlet and/or outlet openings can damage the oven.
• The cabinet is covered with a protective film, remove the film to fully show the
intended color and finish.
2. Attach the microwave oven to the refrigerator by screwing in the 4 four side and
1 rear srews.
• Six screws can be found in the attached bag.
3. Plug refrigerator into the socket provided in the
rear of the microwave oven.
• The socket is intended for use with approved
MicroFridge®
refrigerators. Use of this socket for other
appliances may be
hazardous.
• Model Number for approved MicroFridge®
refrigerator is
located on the label on the rear of the
microwave oven.
Installing Microwave Oven
English
MHM-6 Manual.qxd 2003.11.10 14:49PM Page 7
