Microframe Corporation Series 160 Скачать руководство пользователя страница 4

Microframe Corporation
P.O. Box 1700
Broken Arrow, OK  74013
1-800-635-3811

Limited Warranty Agreement

Your Microframe System is warranted against failure

due to defects in workmanship or material for a period of

one (1) year from the date of purchase. Microframe

Corporation will repair or replace any defective unit.

Obvious abuse or mishandling of the unit is NOT covered

by this warranty.

Merchandise Return

If your Unit does not work satisfactorily, please give

us a call. We may be able to clear up the problem by

phone. If it becomes necessary to return your Unit to the

factory, please observe the following.

1. Place Unit in a sturdy box with sufficient packing

material.

2. If requested, include the power supply. It is not

necessary to return the cable and connectors unless they

are the problem.

3. Return the system insured and prepaid since we are

not responsible for shipping damages and losses on

returned Units.

Warranty Service

For warranty service, please contact Microframe at 1-

800-635-3811. A technician will gladly assist you.

Assistance

For any product assistance or maintenance help,

contact Microframe by either calling 1-800-635-3811 or

emailing us at [email protected].

Safety

Do not install substitute parts or perform any modifi-

cation to the product without first contacting Microframe.

Warning

All power transformers, line cords, and electrical

equipment should be kept out of the reach of children and

away from water. (If you are installing cable in an air

plenum area, such as a drop ceiling used for air return,

you must use plenum-rated cable. The cable supplied

from Microframe is rated CL2 and is approved for instal-

lation everywhere indoors except plenum areas.)

Life Support Policy

Microframe's products are not authorized for

use as components in life support devices or sys-

tems without the express written approval of the

president of Microframe Corporation. 

As used herein:

1. Life support devices or systems are defined as

systems which support or sustain life, and whose failure

to perform when properly used in accordance with in-

structions for use provided in the labeling, can be reason-

ably expected to result in a significant injury to the user

or any one depending on the system.

2. A critical component is any component of a life

support device or system whose failure to perform can be

reasonably expected to cause the failure of the life support

device or system, or to affect its safety or effectiveness.

Disclaimer

We are constantly striving to improve our products.

Due to this, specifications are subject to change without

notice.

Содержание Series 160













Отзывы: