Microframe Corporation
4
604 South 12
th
Street
Broken Arrow, OK 74012
800-635-3811
www.microframecorp.com
Series 4700
The D4700 is a networked Wi-Fi Take-A-Number display that works in conjunction with two or three digit
tickets. The display is controlled by a free app
“D4700” available on the Google Play and Apple app stores.
The (included) wired buttons can also be used to change the displayed count up/down.
Setup
Join your display to your Wi-Fi network
Option 1: Quick Setup from app
1. Install the D4700 app on your mobile device.
2. Plug in the display.
3. Connect your mobile device to the Wi-Fi network "SoftAPxxxxxx".
4. Open the app and follow the Guided Setup process.
Option 2: Quick Setup from computer
1. Plug in the display.
2. Connect the USB cable between the display and your computer.
3. Download the
“WiFi Configuration Software” from the website: https://microframecorp.com/download-
software.
4. Install and run the program
5. Once open, select the name of your Wi-Fi network from the list and type in the password.
6. Optionally, set the display name and PIN number.
7. Press [Save], then wait 30 seconds for the display to connect.
Installation
[Optional] Take the 40ft of wire and cut it into two equal lengths. Connect one button to each wire. Attach the
other end of each wire to the Up/Gnd/Down terminals. Connect the two black wires to the Gnd (common)
terminal. Attach the remaining red wires to the Up/Down terminals.
Attach the power wire to the 24VAC terminals. Polarity does not matter.
Once the display is wired and configured, simply hang it on the wall at your desired location and plug it in.
1.2 Quick Install
1.1 Wi-Fi Display Overview
