Microflex Microlink-HM+ Скачать руководство пользователя страница 10

Limited Warranty

Micro

fl

 ex, LLC warrants this unit against defects in materials and workmanship for a 

period of one year from the date of shipment.  Micro

fl

 ex, LLC will, at its option, repair or 

replace equipment that proves to be defective during the warranty period.  This warranty 

includes parts and labor.

A Return Materials Authorization (RMA) number must be obtained from the factory 

and clearly marked on the outside of the package before equipment will be accepted for 

warranty work.

Micro

fl

 ex, LLC believes that the information in this manual is accurate.  In the event that 

a typographical or technical error exist, Micro

fl

 ex, LLC reserves the right to make changes 

without prior notice to holders of this edition.  The reader should consult Micro

fl

 ex, LLC 

if any errors are suspected.  In no event should Micro

fl

 ex, LLC be liable for any damages 

arising out of or related to this document or the information contained in it.

EXCEPT AS SPECIFIED HEREIN, MICROFLEX, LLC MAKES NO WARRANTIES OR 

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  CUSTOMER’S 

RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE 

PART OF MICROFLEX SHALL BE LIMITED TO THE AMOUNT THERETOFORE 

PAID BY THE CUSTOMER.  MICROFLEX, LLC WILL NOT BE LIABLE FOR 

DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, 

OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE 

POSSIBILITIES THEREOF.  This limitation of the liability of Micro

fl

 ex, LLC will apply 

regardless of the form of action, whether in contract or tort, including negligence.  Any 

action against Micro

fl

 ex, LLC must be brought within one year after the cause of action 

accrues.  The warranty provided herein does not cover damages, defects, malfunctions, or 

service failures caused by owners failure to follow Micro

fl

 ex, LLC’s installation, operation, 

or maintenance instructions; owners modi

fi

 cation of the product; owner’s abuse, misuse, or 

negligent acts; and power failure or surges, 

fi

 re, 

fl

 ood, accident, actions of third parties, or 

other events outside reasonable control.

Micro

fl

 ex, LLC

35900 Royal Road
Pattison, Texas 77423
USA

The HART protocol is supported by the HART Communications Foundation in Austin 
Texas, www.hartcomm.org.  HART is a registered trademark of the HART Communications 
Foundation.

Phone 281-855-9639
Fax 832-422-4391
www.micro

fl

 x.com

Содержание Microlink-HM+











Отзывы: