Operators' Manual
Page 4 of 8 Rev. 2019-01
3. Beam divergence adjustment:
There are two smaller buttons on the upper side of handle controller which are used to adjust the beam
divergence.
Press and hold the SPOT button, the beam divergence will become smaller till 0.8
°
Press and hold the FLOOD button, the beam divergence will become bigger till 15
°
4. Switch white beam and IR:
4.1 The auxiliary IR module can be screwed on S50 easily.
4.2 When the ON/OFF button is ON, you can switch the white beam and IR beam by revolving the knob
on the rear. When the white dot on the knob is pointing to "W", S50 will work in white beam. Otherwise
when the white dot is pointing to "IR", S50 will work in Infrared beam.
FLOOD
SPOT
Three screws to fix
the IR module
IR/White knob
