IM3G-VX
Doc. N° MO-0068-ING
Rev.
1
Pag.
17
of
36
Copyright 2010 - Microener
9. KEYBOARD AND DISPLAY OPERATION
All controls can be operated from relay's front or via serial communication bus.
The keyboard includes five hand operable buttons
(MODE) - (SELECT) - (+) - (-) - (ENTER/RESET)
plus one indirect operable key
(PROG)
(see synoptic table a fig.1):
a) - White key
MODE
:
when operated it enters one of the following operation modes
indicated on the display :
MEASURES
=
Reading of all the parameters measured and of those recorded
in the memory
SET DISP
=
Reading of the settings and of the configuration of the output
relays as programmed.
PROG
=
Access to the programming of the settings and of relay
configuration.
TEST PROG
= Access to the manual test routines.
b) - Green key
SELECT
:
When operated it selects one of the menus available in the
actual operation MODE
c) - Red key
“
+
”
AND “
-
“
:
When operated they allow to scroll the different information
available in the menu entered by the key SELECT
d) - Yellow key
ENTER/RESET
: It allows the validation of the programmed settings
- the actuation of test programs
- the forcing of the default display indication
- the reset of signal Leds.
e) - Indirect key
: Enables access to the programming.
ENTER/RESET
MODE
SELECT
+
-
PROG.
Содержание IM3G-VX
Страница 29: ...IM3G VX Doc N MO 0068 ING Rev 1 Pag 29 of 36 Copyright 2010 Microener 19 TIME CURRENT CURVES F51 TU0311 Rev 0...
Страница 30: ...IM3G VX Doc N MO 0068 ING Rev 1 Pag 30 of 36 Copyright 2010 Microener 20 I2 t CONSTANT ELEMENT F46 TU0312 Rev 0...
Страница 31: ...IM3G VX Doc N MO 0068 ING Rev 1 Pag 31 of 36 Copyright 2010 Microener 21 THERMAL IMAGE CURVES TU0325 Rev 0...
