MC2-30MW
Doc. N°
MO-0495-ING
Copyright 2018
Date
17.03.2022
Rev.
2
Pag. 50
of
66
17.28.4 – Setting “User Trigger Oscillo”
The “User trigger Oscillo” is a result of a logical operation (Or, AND, ecc...), it can be used like other logical
output. This operation is possible only via software.
17.28.4.1 - Name
Internal name
17.28.4.2 - User descr.
Fixed
17.28.4.3 - Linked functions
Selection functions
17.28.4.4 - OpLogic
Operation Logic =
[None, OR, AND, XOR, NOR, NAND, NOT, Ff-SR, Counter, Rise-UP, Fall-Down]
17.28.4.5 - Timer
Time delay (0 ÷ 600)s, step 0.01s
17.28.4.6 - Timer type
Delay
= Add a delay on output activation. The “Timer” is edge triggered on rise edge.
Monostable P
= Activated the output for the time “Timer”
Monostable N
=
Disactivated the output for the time "Timer".
Blinking
=
The output switches periodically at the frequency defined by "Timer".
Delay-Fall-Down
=
Delay-Fall-Down
17.28.4.7 – Extra
Extra Time (0 ÷ 65000)s, step 1s
17.28.4.8 - Logical status
“User Trigger Oscillo” Logical status
