10
mikroBoard for ARM 144-pin
MikroElektronika
page
STEP 4:
Settings
From drop-down menu select
the COM port on your PC
Device Manager on your PC contains information on which COM port is used for USB communication with the mikroBoard for ARM
144-pin development system. In this case the COM5 port is used.
Set Baud Rate to 230400
Enter 14.74568 (if you use different
oscillator set the appropriate value in MHz)
Right click on USB port, then on Properties
From pop-up window se
-
lect the Port Settings tab
In pop-up window uncheck the Serial
Enumeration option and click OK
Click on the Advanced... button