Microelectronic NH MicroM30/12 HDMI USB, Руководство по эксплуатации, Страница: 19 / 95

19
Connecting the receiver
The receiver is connected with your satellite antenna by
means of a coaxial cable. If necessary, you have to
prepare a coaxial cable before connecting the receiver.
The coaxial cable is not included in the scope of
supply.
Caution!
Connect the receiver to the mains supply only after you
have connected it to all equipment and the antenna
properly. Otherwise, there is a risk of electric shock
that can be a threat to life or physical condition. Also
the receiver can suffer damages.
Caution!
Information on separation from power source. The
Standby key of this device will not separate the device
completely from the power source. In addition, the
device will draw current. To separate the device
completely from the power source, the mains plug
must be pulled out of the socket.
The wire netting and the inner core of the coaxial cable
carry current during operation.
Caution!
Camping or trailer operating:
The receiver can also be connectet to 12 Volt ( viz. 11-
14 Volt, e. g. solar collector, motor vehicle). To do this,
use the 12 Volt cable.
Caution! For using vehicles with 24 volt on-board
voltage (eg, trucks), you have to use a 24V / 12V DC /