Micro
dome Duo®
Installation Manual
Page | 26 [email protected]
+1.818.937.0700
|
877.CAMERA.8
|
www.arecontvision.com
|
General Remote Focus
1. To control the remote focus via the web interface, double click the camera within the AV IP Utility
(Figure 1) or
open your preferred web browser and type the camera’s IP address (Figure 2).
NOTE: For supporting H.264 streaming on a webpage, the recommended browsers are Internet Explorer and
Firefox.
Figure 1: Double click via AV IP Utility
Figure 2: Type the camera IP address
2. Scroll to the Focus Tab section.
NOTE: Additional information regarding the Arecont Vision
®
web interface is found separately in the
AV IP
Utility Web Browser Manual
via the Arecont Vision website.
3.
Click the “Select Channel” and choose channel 1 (Please see image below)
4. Click the Full-range Focus button. The camera begins to autofocus with the lens stopping at the best
overall point of focus. When the focus area turns to Green, the autofocus is complete.