MICRODIA Ltd
Email: [email protected]
Website: http://www.microdia.com
miniSD
TM
MEMORY CARD
OPERATING MANUAL
SPECIFICATIONS
CONFIRMATION OF PARTS LIST
Dimension:
20.0 (W) x 21.5 (L) x 1.4 (T) mm
Weight: Approx.
1g
Operating Voltage:
2.7 to 3.6 V
Operating Temperature:
-25
°
C to +85
°
C
Clock Frequency:
Up to 25MB/sec
Operating Humidity:
5% to 96% RH
miniSD
TM
Card
miniSD
TM
Adapter
Plastic Case
Manual
NOTE: Specifications are subject to change without notice.
REMOVAL AND STORAGE OF THE miniSD
TM
CARD
1. Hold a corner of the blister.
2. Clap the blister on your palm for removing the plastic case.
3. Hold the case with both hands when opening and closing.
4.
Unlock and open the lid of the case.
5.
Store or remove the miniSD
TM
card and adapter in the tray. Ensure the miniSD
TM
card and adapter are placed properly on the tray
before closing the case.
Step 1 & 2
Step 3 & 4
Step 5
miniSD and miniSD Adapter
PRECAUTIONS FOR HANDLING AND STORAGE
•
Keep out of the reach of children. Get medical advice immediately if swallowed.
•
Do not touch the interface pin directly by hands, metal or hard objects.
•
Do not modify or disassemble the miniSD
TM
card.
•
Do not wet, heat/fire, impact, drop or bend the miniSD
TM
card.
•
Do not use or store in a humid and dusty place; in hot place such as inside a hot car, under a blazing sun, near
fire, a stove, an air-conditioner outlet, etc.
•
Do not expose to strong magnet fields, electrical noise and put near corrosive chemicals/gas. This may cause
damage through melting or the emission of heat/smoke or cause product failure.
•
Do not place in cooking appliances such as microwave ovens or high-pressure containers.
•
Do not detach the label on the miniSD
TM
card and adapter. Do not attach other stickers/labels on the miniSD
TM
card and adapter.
DATA PROTECTION
•
MICRODIA miniSD
TM
Memory Card comes pre-formatted. Make sure to back up all the data on your
miniSD card before formatting.
•
Slide down Write-Protect Switch to “LOCK” for preventing record/edit the card. Unlock the card before
reading/writing data.
Unlock Lock
•
Do not remove the miniSD
TM
card and switch off any equipment using the card when data is being read,
written and transferred. It can cause data to be destroyed.
•
Insert the miniSD
TM
card firmly in the correct orientation. The product will not operate correctly if it is
inserted in an incorrect orientation or not inserted all the way
•
Parental Guidance is needed when a child uses the miniSD
TM
card. Teach the child how to use and
protect the product and insure that the child follows your instructions.
