6
5
this document contains important information to facilitate a smooth start-up of your µMIC.200.
More helpful tips and tricks on the usage of the automation Controller you will find in the µMIC.200
manual.
Serial Interface
Connect the serial cable to the terminals
according to the terminal denominations
in the picture.
Settings of the serial interface:
Bit rate: 115200Bit/s
Data bits: 8
Parity: none
Stop bits: 1
after the voltage has been applied Linux
will display log messages. You can now
log into the µMIC.200.
Login data:
user: umic
Password: umic
Example for log in via serial interface:
‚cd Examples/blinky/project/ && make &&
sudo ../objs/umic_blinky
the “blinky” programme is compiled and started. to execute the programme enter the
password “umic”.
the LEDs of the µMIC.200 are now flashing red and green in turn.
Option for Linux users
Junkersring 23
53844 troisdorf
Germany
tel.: +49 (0) 2241/25 65 9 - 0
Fax: +49 (0) 2241/25 65 9 - 11
www.microcontrol.net
Your µMIC.200 is now ready for use. Benefit from comfortable and highly efficient tools such as IEC
61131-3 or C/C ++ to integrate your new control system into your company-specific environment.
Develop now!
