MicroComm DXL TMM-640, Руководство по установке, Страница: 19 / 25

TMM-640 VoIP Touchscreen Master Module
Document IM-TMM-640-1.2 Page 19
Next, click on the
VoIP Accounts tab on the menu bar.
On the VoIP Account Settings screen, click the name of the master under VoIP Accounts (in this example, the
name given during setup was “ Eng Lab Debugger ” so in this case you would click the text “ Eng Lab
Debugger ”). This brings up the VoIP Account Settings screen for this master.
These VoIP Account Settings were previously entered in the MicroComm Setup Wizard, but a brief description
of the settings is below if you need to change them after the initial setup.
Account Name is a short description for this SIP account; usually this should be the same as the Extension Name .
Account Username must be the master number (same as the Master Number in the DXL Administrator).
Domain must be set to the IP address of the DCC that controls the exchange that the master associated with in the
DXL Administrator.
Authorization Username, Authorization Password, and Outbound Proxy settings are only used when the TMM-
640 is used with a SIP Proxy server. This is not used for a DXL system, so should be set to blank.
Check-mark the “ Registration Enabled ” (or “ Register ” for older TMM-640s) and “ Auto Answer ” check boxes.
The remainder of the settings should be left at the default settings.
If you have made any changes, click “ Update ”.