Microcom 485TM, Руководство оператора

Страница: 44 / 81

Getting Started Chapter 3
3-30 485TM Operator’s Manual - 880063-0100
3.16.10.5 Paper tab - Default
This button will cause the driver to load in its default settings for the model driver installed.
Please note that this default may not represent your media type or size.
3.16.11 Printing Preferences - Media tab
The Media tab is used to set specific setting of the media size and operations that in a form
that the printer requires to maintain correct registration.
3.16.11.1 Media tab - Settings
The Settings control the Type of registration that the printer will use to align the media being
used and the Darkness of the image being printed.
3.16.11.1.1 Settings - Type
This field sets the registration method that the printer will use to register job to job. This
type should be set to the type of registration mark that is used to indicate the form size. The
Continuous setting instructs the printer to ignore registration marks and will move media
based on the form size settings. The Blackline setting cause the printer’s reflective sensor
to look for a blackline mark and register based on the other Feed options. The Diecut and