Microcom 48-466, Руководство оператора

Страница: 78 / 88

Quick Reference Command Summary Appendix A
48-466 Operators Manual 72
A ^D COMMAND
26 Change SW6: Change software dip switch #6.
12345678
^ABxxxxxxxx
*******.
Not Used
******.)
Not Used
*****.))
Not Used
****.)))
Not Used
***.))))
Not Used
**.)))))
Not Used
*.))))))
Not Used
.)))))))
Always 0
29 Printer Statistics:
0 Print statistics to serial port
1 Print statistics on a label
2 Clear the printed labels variable in the statistics
3 Clear the printed inches variable in the statistics
30 Change Clock: Use the sequence below to set the time and date of the optional
real-time clock:
^D30 (return)
HH:MM:SS (return)
DD/MM/YY/W (return)
31 Show Clock: This command will send the date and time to the serial port.
32 Reset Machine: Restores printer to power-up settings. Also used to set the
EEPROM fields in memory. Section 5.3.
33 Display Model and Revision Number .
XX 35 Contrast Window Adjust: This is the temporary contrast adjustment. The ^AXX
is between 10 and 200%
XX 36 Adjust Contrast Base: Non-Volatile command. The ^AXX is between 10 and
200%. Section 5.3.
XX 37 Show Voltages: This command will send the values of the internal printer
voltages.
40 Clear Commands 41-51.
XX 41 Load number of fields in layout (HFM): Preceded by ^A.
XX 42 Load label width in dots (LXS): Preceded by ^A.
XX 43 Load label height in dots (LSY): Preceded by ^A.
XX 44 Load web size in dots (WEB): Preceded by ^A.