Microchip Technology Voltage Supervisor SOT23, Руководство пользователя

Страница: 25 / 28

VOLTAGE SUPERVISOR
SOT23 EVALUATION BOARD
USER’S GUIDE
©
2006 Microchip Technology Inc. DS51510B-page 21
Appendix C. Microchip Analog SOT-23 Device Compatibility
C.1 INTRODUCTION
This appendix documents other Microchip analog devices that can be evaluated using
this PCB. New devices may be introduced after the publication of this document that
may be supported. Compare the pinout of the device to the PCB schematic/layout to
determine compatibility of any SOT-23-3 (3-pin SOT-23) packaged device.
C.2 PCB COMPATIBILITY
There are four SOT-23-3 (3-pin SOT-23) pinouts that the Voltage Supervisor SOT23
Evaluation Board PCB supports. Figure C-1 shows these four pinouts. Other Microchip
analog devices may be used with this PCB if the power and ground pins match one of
these four options. Though these devices may use different nomenclature for the pin
names, as long as the power and ground signals match one of the four options, this
PCB should be able to be used to evaluate that device.
Table C-1 shows the Microchip analog device part number, the analog family the device
belongs to, which footprint option to use and the recommended components to use for
the circuit. Please refer to the device data sheet for complete information of the appli-
cation circuit.
FIGURE C-1: SOT-23-3 PINOUT OPTIONS
1
2
3
1
2
3
1
2
3
1
2
3
V
OUT
V
SS
V
DD
Option 1
V
DD
V
SS
V
OUT
V
SS
V
SS
V
DD
V
DD
V
OUT
V
OUT
Option 2 Option 3 Option 4